Haas Basic Lathe Operator
Below is the Basic Lathe Operator Course Curriculum. Please review the following points, prior to starting this course:
Courses are presented one chapter at a time, with individual topics presented in video format. Each video is followed by a corresponding quiz to test your understanding of the topic presented. You must pass the quiz for each topic to gain access to the next topic.
- Start by viewing the Introduction to Haas Certification video below (there is no corresponding quiz)
- To begin your course, select the first topic in Chapter 1, watch the video, and take the quiz
- Once you have clicked the Take Quiz button, you will have 15 minutes to complete the quiz
- You must score 100% on each quiz to pass, and gain access to the next topic; if you fail a quiz, you must retake it until you pass
- Quizzes are straightforward, and based solely on the content presented in the corresponding video – there are no trick questions
- Best of luck on your journey through the Haas Certification Program!
Jose Jimenez - Haas Basic Lathe Operator Feedback
Jose,
His father owns a machine shop with Haas machine and is able to operate the machine with ease.
He passes the hands on final very easily.
-Ernie Simmons
Sergio Serrato - Haas Basic Lathe Operator Feedback
Sergio,
Loaded the stock in the chuck with ease and was able to start the program safely using single block and the distance to go position screen.
-Ernie Simmons
Rose Denise Santos - Haas Basic Lathe Operator Feedback
Denise,
Had no experience with loading the stock in the chuck but did a great job for the first time. She was really familiar with the button on the control and was able to start the program safely using single block and the distance to go position screen.
-Ernie Simmons
Jacob Richards - Haas Basic Lathe Operator Feedback
Jacob,
Was able to safely start the program safely using single block and the distance to go position screen. He passes the hands on final with ease.
-Ernie Simmons
Bradley Samuel - Haas Basic Lathe Operator Feedback
Bradley,
Loaded the stock in the chuck and was able to start the program safely using single block and the distance to go position screen.
-Ernie Simmons
Dmitry Rogozhin - Haas Basic Lathe Operator Feedback
Dmitry,
Passed the hands on final very easily and he knows the Haas control very well.
-Ernie
Iris Kim - Haas Basic Lathe Operator Feedback
Iris,
Selected the correct material after I explained the different types of material look and feels like. She did better when loading the stock in the collet nose. She was able to start the program safely using single block and the distance to go position screen.
She had problems when trying to measure the part with calipers because she is left handed.
She had good questions about turret position and tool offsets for the lathe.
I am passing Iris because she understands how to start the program safely.
-Ernie Simmons