Haas Basic Mill Operator
Below is the Basic Mill Operator Course Curriculum. Please review the following points, prior to starting this course:
Courses are presented one chapter at a time, with individual topics presented in video format. Each video is followed by a corresponding quiz to test your understanding of the topic presented. You must pass the quiz for each topic to gain access to the next topic.
- Start by viewing the Introduction to Haas Certification video below (there is no corresponding quiz)
- To begin your course, select the first topic in Chapter 1, watch the video, and take the quiz
- Once you have clicked the Take Quiz button, you will have 15 minutes to complete the quiz
- You must score 100% on each quiz to pass, and gain access to the next topic; if you fail a quiz, you must retake it until you pass
- Quizzes are straightforward, and based solely on the content presented in the corresponding video – there are no trick questions
- Best of luck on your journey through the Haas Certification Program!
Intro Video:
Final Video:
[email protected] Haas Basic Mill Operator feedback
Johnny Estrada - Haas Basic Mill Operator Feedback
Johnny pick the correct material from the drawing very quickly. He loaded the stock in the vise against the stop and tightened it with the correct pressure.
He checked the program to see if the correct tools were in the carousel and was able to start the program safely using single block and distance to go.
Michelle Norman - Haas Basic Mill Operator Feedback
Michelle knew all the buttons of the control but you can tell that she has no experience running parts on a machine. She did really well loading the part in the vise against the stop.
She needed some instruction on how to use the distance to go to start the first tool but after a few practice runs she has the concept now.
[email protected] Haas Basic Mill Operator feedback
[email protected] Haas Basic Mill Operator feedback
Travis Day - Haas Basic Mill Operator Feedback
Travis Day