Johnny pick the correct material from the drawing very quickly. He loaded the stock in the vise against the stop and tightened it with the correct pressure.
He checked the program to see if the correct tools were in the carousel and was able to start the program safely using single block and distance to go.
Michelle knew all the buttons of the control but you can tell that she has no experience running parts on a machine. She loaded the part in chuck against the stop.
She use single block and distance to go to start the first tool safely.
Michelle knew all the buttons of the control but you can tell that she has no experience running parts on a machine. She did really well loading the part in the vise against the stop.
She needed some instruction on how to use the distance to go to start the first tool but after a few practice runs she has the concept now.
Travis Day
Karla knows the control very well and has a good understanding of how to use single block and the distance to go positions screen too safely start a program that she has not ran before.
She checked the chuck jaws indicator to make sure that the part is clamped in the chuck correctly.
She has very little experience loading a part in a chuck but did a good job making sure that the jaws were clean and that the part was against the stop when closing the chuck.
Karla knows the control very well but has little practice loading a part in a vise. She did great the first time pushing down with the handle to unclamp the vise, making sure that the stock was against the stop and tightening it pushing down.
She also has a good understanding of how to use single block and the distance to go positions screen too safely start a program that she has not ran before.
