Radik,

          Knows the has control very well and had no problem picking out the stock to be used. Hasn’t worked on machine but was very exited to learn now to load the part in the chuck and how to use the distance to go positions display to start the program safely. After practice using the distance to go he has it down where he can start the program safely to verify the offsets are correct. He follows instructions well and would make a great operator with some more practice.

He passes the hands on final with little previse experience.

-Ernie Simmons

Student successfully loaded a program, tooling, and workpiece.  Checked coolant level, no adjustment required.  Initial run with single block and rapid reduced to prove program, and part.  Ran a second part at production speeds creating a part in specification.  Student demonstrated caution and care while operating Haas ST10.

Radik,

          Knows the has control very well and had no problem picking out the stock to be used. Hasn’t worked on machine but was very exited to learn now to load the part in the vise and how to use the distance to go positions display to start the program safely. After practice using the distance to go he has it down where he can start the program safely to verify the offsets are correct. He follows instructions well and would make a great operator with some more practice.

He passes the hands on final with little previse experience.

-Ernie Simmons

Panagiotis,

          Hasn’t worked on lathe machine but was very exited to learn now to load the part in the chuck and how to use the distance to go positions display to start the program safely. After practice using the distance to go he has it down where he can start the program safely to verify the offsets are correct. He follows instructions well and would make a great operator with some more practice.

He passes the hands on final with little previse experience.

-Ernie Simmons

Panagiotis,

          Hasn’t worked on mill machine but was very exited to learn now to load the part in the vise and how to use the distance to go positions display to start the program safely. After practice using the distance to go he has it down where he can start the program safely to verify the offsets are correct. He follows instructions well and would make a great operator with some more practice.

He passes the hands on final with little previse experience.

-Ernie Simmons

Student successfully loaded a program, tooling, and workpiece.  Checked coolant level, no adjustment required.  Initial run with single block and rapid reduced to prove program, and part.  Ran a second part at production speeds creating a part in specification.  Student demonstrated caution and care while operating Haas ST10.