This student was very well versed in all things Haas. It was evident that he took the courses seriously and paid attention.

Successfully completed the checklist. Checklist will be up loaded when available.

Successfully completed the checklist. Checklist to be uploaded.

Performed required tasks from checklist. Checklist to be uploaded.

Matt did very well for working with Haas machines for less than a few weeks. You can tell that he has worked on CNC machines and knows how to load a  the stock correctly in the vise. 

He used one hand when single blocking the first tool but pressed feed hold well above the part to check the distance to go display.

He cleaned the whole table with the air gun when changing the part. I explained that this is nessary when running production. 

Ernie Simmons

Thomas did well on the hands on test.  He had some experence running Haas, so he did well with running a program. 

Points Avaiable: 600

Points Received: 570

Final % 95

Taylor demonstrated a diverse knowledge in machine structure, tooling, tolerences, and material specification. He understood how to run a program safley and effectivley and knew how to navigate around the control effeciently. 

James demonstrated vast knowledge in the machine structure, measuring devices, tooling, and material selection. One thing that needs to be worked one is control navigation, but that can be worked on with time and practice.