[email protected] - HAAS Mill Operator Feedback
Michael was very comfortable on the machine and it was evident that his knowledge is beyond that of an operator.
[email protected] - HAAS Mill Operator Feedback
Alex was wearing safety glasses and the correct apparel for running a machine.
He was able to show me the electrical, air and lube cabinets and knows that he should not open ether of them.
He was able to tell me the correct range for the air pressure for the machine and that the coolant level should be check at the beginning of every shift.
Used calipers to pick the correct material and size needed to make the part from the drawing.
Alex answered all of the questions about the control correctly with no hesitation (E-stop, Feed Hold and Overrides buttons).
[email protected] - HAAS Mill Operator Feedback
Spencer was a little rough taking the hands-on test.
Overall he understands what we are testing & did good at running the part on the machine.
He could use some help with inspecting the part & understanding some of the tools you will see around the shop.
Overall he did enough to pass the hands on test.
With a little time on a machine, he will start to gain confidence.
Total Points Available: 600
Total Points Received: 515
Final Score: 86%
[email protected] - HAAS Mill Operator Feedback
Richard did really well on the hand-on test.
He seems comfortable with the machine & control.
Total Points Available: 600
Total Points Received: 560
Final Score in %: 93%
[email protected] - HAAS Mill Operator Feedback
Thomas did really well on the hand-on test.
He seems comfortable with the machine & control.
Total Points Available: 600
Total Points Received: 565
Final Score in %: 94%
[email protected] - HAAS Mill Operator Feedback
Lauren had no experience running a machine but does work in a shop with Haas machines.
She did really well on the hands-on part of the test.
She was very nervous when she started running the test part, but did really well.
Total Points Available: 600
Total Points Received: 540
Final Score in %: 90%
[email protected] - HAAS Mill Operator Feedback
Jarred did really well on the hands-on test.
Total Point Available: 600
Total Point Received: 575
Finial Score in %: 96%
[email protected] - HAAS Mill Operator Feedback
This was the best student. He really know his stuff!
Joke, this is a test of the system.
cmchugh - HAAS Mill Operator Feedback
Chris passed his hands on test!
11.1 Machine Maintenance - Basic Mill Operator
| Questions | 14 |
|---|---|
| Attempts allowed | Unlimited |
| Available | Always |
| Pass rate | 100 % |
| Time limit | 0:15:00 |
| Backwards navigation | Allowed |
You are not allowed to take this Training Program.