Connor was wearing safety glasses and the correct apparel for running a machine.

He was able to show me the electrical, air and lube cabinets and knows that he should not open ether of them.

He was able to tell me that the coolant level should be check at the beginning of every shift.

Used a scale to pick the correct material and size needed to make the part from the drawing.

Connor answered all of the questions about the control correctly (E-stop, Feed Hold and Overrides buttons).

Treyton was wearing safety glasses and the correct apparel for running a machine.

He was able to show me the electrical, air and lube cabinets and knows that he should not open ether of them.

He said that the coolant level should be check at the weekly. I explained that it should be checked every day or before every shift.

Used a caliper to pick the correct material and size needed to make the part from the drawing.

Treyton answered all of the questions about the control correctly (E-stop, Feed Hold and Overrides buttons).

Colin was wearing safety glasses and the correct apparel for running a machine.

He was able to show me the electrical, air and lube cabinets and knows that he should not open ether of them.

He was able to tell me that the coolant level should be check at the beginning of every shift.

Used a caliper to pick the correct material and size needed to make the part from the drawing.

Colin answered all of the questions about the control correctly (E-stop, Feed Hold and Overrides buttons).

Daniel needs a little more time running a machine to be able to be comfortable with performing operator duties. I don't think it will take him long to be able to pass the hands on test. 

Daniel struggled with the following:

Michael was very comfortable on the machine and it was evident that his knowledge is beyond that of an operator.

Alex was wearing safety glasses and the correct apparel for running a machine.

He was able to show me the electrical, air and lube cabinets and knows that he should not open ether of them.

He was able to tell me the correct range for the air pressure for the machine and that the coolant level should be check at the beginning of every shift.

Used calipers to pick the correct material and size needed to make the part from the drawing.

Alex answered all of the questions about the control correctly with no hesitation (E-stop, Feed Hold and Overrides buttons).

Spencer was a little rough taking the hands-on test.

Overall he understands what we are testing & did good at running the part on the machine. 

He could use some help with inspecting the part & understanding some of the tools you will see around the shop.

Overall he did enough to pass the hands on test. 

With a little time on a machine, he will start to gain confidence. 

Total Points Available: 600

 Total Points Received: 515

Final Score: 86% 

Richard did really well on the hand-on test. 

He seems comfortable with the machine & control. 

Total Points Available: 600

Total Points Received: 560

Final Score in %: 93%

Thomas did really well on the hand-on test. 

He seems comfortable with the machine & control. 

Total Points Available: 600

Total Points Received: 565

Final Score in %: 94%

Lauren had no experience running a machine but does work in a shop with Haas machines. 

She did really well on the hands-on part of the test. 

She was very nervous when she started running the test part, but did really well. 

Total Points Available: 600

Total Points Received: 540 

Final Score in %: 90%