This student cut the raw material using an instructor-created setup sheet and ensured the proper tools were in the correct pockets. This student also performed tool offsets and work offsets using the HAAS WIPS system. This student then machined a part requiring four operations and two work offset procedures.

This student cut the raw material using an instructor-created setup sheet and ensured the proper tools were in the correct pockets. This student also performed tool offsets and work offsets using the HAAS WIPS system. This student then machined a part requiring four operations and two work offset procedures.

This student cut the raw material using an instructor-created setup sheet and ensured the proper tools were in the correct pockets. This student also performed tool offsets and work offsets using the HAAS WIPS system. This student then machined a part requiring four operations and two work offset procedures.

This student cut the raw material using an instructor-created setup sheet and ensured the proper tools were in the correct pockets. This student also performed tool offsets and work offsets using the HAAS WIPS system. This student then machined a part requiring four operations and two work offset procedures.

This student cut the raw material using an instructor-created setup sheet and ensured the proper tools were in the correct pockets. This student also performed tool offsets and work offsets using the HAAS WIPS system. This student then machined a part requiring four operations and two work offset procedures.