Bradley,
Tended to look at the pendent when pressing the cycle start button. I had him practice looking at the tool instead of the pendent when pressing the cycle start.
Loaded the stock in the vise with ease and was able to start the program safely using single block and the distance to go position screen.
-Ernie Simmons
Dmitry,
Passed the hands on final very easily and he knows the Haas control very well.
-Ernie
Dmitry,
Passed the hands on final very easily and he knows the Haas control very well.
-Ernie
Iris,
Selected the correct material after I explained the different types of material look and feels like. She did better when loading the stock in the collet nose. She was able to start the program safely using single block and the distance to go position screen.
She had problems when trying to measure the part with calipers because she is left handed.
She had good questions about turret position and tool offsets for the lathe.
I am passing Iris because she understands how to start the program safely.
-Ernie Simmons
Iris,
Had no experience with loading the stock in the vise but after practicing a few times got the hang of it. She was pretty familiar with the button on the control and was able to start the program safely using single block and the distance to go position screen.
She had problems when trying to measure the part with calipers because she is left handed.
She had good questions about the thread gage and other details of the final to better understand the control.
