Excellent job! 

Excellent job! 

Excellent job!

Passed with flying colors! Excellent!

successfully completed checklist 2/24/20

Mike was very familiar with the Haas control and was able to explain the functions of all of the buttons.

He had no problem selecting the correct material and loaded the stock in the vise with the correct torque.

He used both hands when using single block and verified the distance to go at 25% rapid.

Mike did a good job taking the final with the limited time he has had working on an actual machine.

Ernie Simmons

John did not pass the first time he tried to taking the final because he did not understand how to use the distance to go screen. He waited to press feed hold after the machine had already completed that block.

John spent some time practicing on a machine in R & D and was able to pass the final the second time.

He was able to explain the functions of all of the buttons. He was a little unsure of where some of the buttons were on the pendent.

He had no problem selecting the correct material and loaded the stock in the vise with the correct torque.

Richard was very familiar with the Haas control and was able to explain the functions of all of the buttons.

He had no problem selecting the correct material and loaded the stock in the vise with the correct torque.

He used both hands when using single block and verified the distance to go at 25% rapid.

He was a little unsure of where the interlocks were on the doors.

Richard did a good job taking the final with the limited time he has had working on an actual machine.

Ernie Simmons