Below is the Basic Mill Operator Course Curriculum. Please review the following points, prior to starting this course:
Courses are presented one chapter at a time, with individual topics presented in video format. Each video is followed by a corresponding quiz to test your understanding of the topic presented. You must pass the quiz for each topic to gain access to the next topic.
Dylan did well on the hands-on test. He did well at running the machine, but could use some help with understanding the measure tools.
Dylan has no experience running a machine, but works in Haas Part at HFO Pittsburgh.
Total Points Available: 600
Total Points Received: 547.50
Final %: 91%
Damiond did well on the hands on test. I can tell that he has experence running CNC's in the passed.
Damiond really enjoyed the certifiation program & is looking forward to take any future certification programs.
He had a ton of good questions about Haas.
Total Points Available: 600
Total Points Received: 565
Final %: 94%
awesome job
student is ready
Bilel,
Passed the mill operators hands on test with excellence. He had no problem with selecting the correct stock for the part. He explained the different features of the machine including the function of the different keys on the pendent.
When loading the stock he made sure that the vise surfaces were clean, loaded the part correctly against the stop and tighten the vise correctly.
Andrew did well on the hand-on test.
Point avaiable: 600
Total Point Received: 555
Final %: 93%
Jeff did well on the hands on test. Jeff is a PM tech at HFO Pittsburgh, so he understands the machines.
When running a program, Jeff did good but could use a little more time on a machine.
Points Available: 600
Points received: 562.5
Final % 94%
Student showed general knowlede of the Mill, and showed he could safely operate it.
Passed.
Mark Chambers is not interested in Final Hands on Exam
Not interested in Hands on Exam
